If you’re the proud owner of a Chevy Equinox from 2018, you know how important it is to have a functioning key fob. After all, it’s the only way to unlock and start your car with ease. But if you’re having trouble with your key fob, don’t worry. Programming a Chevy Equinox key fob in 2018 is a relatively simple process, and it won’t take long to get it done.
Table of Contents
What You’ll Need
Before you start, you’ll need to make sure you have the right tools. You’ll need two working key fobs that are compatible with your 2018 Chevy Equinox. You’ll also need a flathead screwdriver and a Phillips screwdriver. Once you’ve gathered all the tools, you’ll be ready to get to work.
Step-By-Step Guide
The first step is to open the door to your Chevy Equinox and turn the key in the ignition. Once the car is on, press the “Unlock” button on the first key fob. Then, press and hold the “Lock” button on the second key fob. You should hear a beep, which indicates that the key fob is now programmed.
The next step is to remove the casing on the key fob. To do this, you’ll need to use the flathead screwdriver to remove the screws. Once the screws are removed, you’ll be able to access the battery compartment. Inside, you’ll find two small Phillips screws. These screws will need to be removed so that you can access the circuit board.
Now, it’s time to program the key fob. To do this, you’ll need to press and hold the “Lock” and “Unlock” buttons at the same time. While you’re pressing the buttons, press the “Program” button on the circuit board. You should hear a beep that indicates that the key fob is now programmed.
Testing the Key Fob
Once you’ve finished programming the key fob, it’s important to test it to make sure it’s working correctly. To do this, press the “Lock” button on the key fob. You should hear the car lock, indicating that the key fob is working properly. If it doesn’t work, you’ll need to repeat the programming process.
Conclusion
Programming a Chevy Equinox key fob in 2018 is a relatively simple process. All you need is two working key fobs, a flathead screwdriver, and a Phillips screwdriver. Once you’ve gathered the tools, you’ll be able to start programming the key fob. Just make sure to test it when you’re finished to make sure it’s working properly.
